The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares Cali 3 Cali 1100 1994-1997 Brakes

Sort by Title

Sort by Price

Page 2 of 8

1 2 3 4 5 6 7 8

Gear or Brake Linkage Block

GEA18551 Fits V35 ALL, V50 ALL, V65 ALL, Nevada 750 ALL, Strada 750, 750 Targa, 750 SP, V7 Stone, V7 Special, V7 Racer, V7 II ALL, 850/1000 ALL Models, Cali 1100 (1994-1997)

Dimensions:
M6 threads, 8mm ID hole

Threaded linkage block used on brake or gear linkages (varies by model). Screws to M6 threaded rod

Wears over time, so we recommend replacing if your gear or brake linkage is sloppy

This part is available by special order, request a quote

18257551 GU18257551 18 25 75 51
1825 7551 1825.7551 18.25.75.51

£63.00

INC VAT

£52.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brakeline Rear

BRA18658 Fits 1000 SP, Le Mans 1, T3, 1000 SP, Le Mans 3, Cali 2, Cali 3 IE

Dimensions:
50cm long

Flexible brake pipe from linked master cylinder to proporting valve or rear manifold

Original type rubber brake line with chunky ends

This part is available by special order, request a quote

18658560

£36.00

INC VAT

£30.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Master Cylinder Reservoir Overhaul Kit PS15 Brembo

BRA14901 Fits Cali 1100 (frame nos to KC12446 and after KD12178), 850/1000 ALL Models, V35 ALL, V50 I, V50 II, V65 ALL, V75 (4 valves per cylinder), 850T, V7 Sport, 750S, S3

Dimensions:
58mm OD

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338

Sorry this part is no longer available Sorry, this part is no longer available.

14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

this part is no longer available
Sorry this item is out of production

Caliper Piston Set Brembo P08/F08

BRA11000 Fits 750S, S3, V7 Sport, 850/1000 ALL Models, Cali 1100 (1994-1997)

Dimensions:
38mm OD x 20mm

Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons

A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£35.00

INC VAT

£29.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Disc Carrier

BRA28770 Fits Cali 3, Le Mans 1000, Spada 3, 1000S, Strada 1000, 750 SP, Strada 750, 750 Targa, Nevada 750 (1991-1993), Lario, T5, SP II, Monza 2, V75, V35 3

5 hole disc carrier finished in black

We recommend you check your bobbins, spring washers and circlips are OK as these may also require replacement. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to Lario, T5, SP II, Monza 2, V75 and V35 3

This part is available by special order, request a quote

28613770 GU28613770 28 61 37 70
2861 3770 2861.3770 28.61.37.70

£33.10

INC VAT

£27.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M10 Single Banjo Bolt

BRA41653 Universal Part

Dimensions:
M10 bolt with M6 bleed nipple

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover
1 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£33.00

INC VAT

£27.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brakeline Front LH Caliper to Fixed Pipe

BRA17886 Fits V35 II, V35 3, V35C, V50 3, V50C, V65C, V65 Florida, V75 PA, 750 Targa, Strada 750, 750 SP, Cali 3, Le Mans 2, Le Mans 3, Cali 1100

Dimensions:
74cm long

Brake pipe used for supplying front left hand caliper, screws directly into caliper

Original type rubber brakeline with chunky galvanized ends

This part is available by special order, request a quote

17658860-z 17658860 GU17658860 17 65 88 60
1765 8860 1765.8860 17.65.88.60

£32.80

INC VAT

£27.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Aluminium Master Cylinder Cap PS15 Brembo

BRA14102 Fits Cali 1100, Cali EV, 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75, Nevada 750, 850T, V7 Sport, 750S, S3

Gorgeous polished aluminium reservoir cap for PS15 Brembo master cylinder fitted to rear linked system on many models, will fit front master cylinder on models where a PS15 handlebar master cylinder is fitted. Seal is not included with this cap - you should re-use your original cap seal

Make your Guzzi stand out from the crowd!

This part is available by special order, request a quote

14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

£32.50

INC VAT

£27.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Aluminium Master Cylinder Cap PS12 Brembo

BRA14103 Fits S3, Convert, G5, Cali 2, Le Mans 1, Le Mans 2, Le Mans 3, T3, T4, V35 II, V50 3, V65 ALL, V75 (4 Valves Per Cylinder), 750 SP, 750 Targa, Strada 750, NTX 350, V35 II, V35 Florida, Cali EV, Cali Jackal, Nevada (1991 - 2003), Cali 1100 (Frame Nos KC12446 - KD12178), Cali Stone, 1200 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Norge ALL, Quota 1100, Stelvio, Bellagio

Dimensions:
53mm OD

Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models

Make your Guzzi stand out from the crowd!

This part is available by special order, request a quote

10430830 GU10430830 10 43 08 30
1043 0830 1043.0830 10.43.08.30

£32.50

INC VAT

£27.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Switch Brake Light

ELA27815 Fits Mille GT, Cali 3, Spada 3, Strada 750